Oven models · Gas range
Wolf GR304: Gas Oven Slow to Light?
GR304 Gas range Built 2013 on
The GR304 is Wolf's 30-inch all-gas range, four burners over a single convection oven, in production since 2013. When that oven clicks longer and longer before it catches, Wolf Repair Bellevue, (425) 629-0033, watches it try to light on the $89 visit and names the tired part before quoting.
- Written and checked by
- Imogen Fairhurst
- Dated
- Bench speciality
- ovens and calibration
- Years at it
- 12
- Surface burners on top
- Oven knob and control
- Broil burner
- Convection fan behind its cover
- Bake burner and its igniter
- Door gasket
- Door hinges
What fails on it
- Fouled or worn igniter Baked-on residue or plain wear on the igniter beside the burner. The clicking stretches out a little more each week, or the first attempt fails and the second works.
- Ignition board slow to see flame The board running the lighting sequence keeps the igniter clicking because it has not registered the flame yet, and after two misses it stops trying altogether.
- Pinched or loose wiring The igniter lead chafed or squeezed on its way to the burner, or a connection worked loose. Lighting turns fine one evening and hesitant the next.
- Gas valve slow to open If the valve feeding the burner sticks, the igniter clicks away with nothing to light yet. Valve work has no set band and is quoted after the diagnosis.
What “slow to light” looks like
Set a temperature and the oven indicator light comes on while the igniter starts clicking. On a healthy GR304 the clicking ends as the burner takes, and preheat carries on quietly until the light goes out. Trouble arrives gradually: a few more clicks each week, a louder whoosh when the gas finally catches, or an oven that needs a second go.
Four checks from the front of the range
Push the knob in and turn it fully onto a temperature, not between settings. Leave the convection button alone until preheat has finished. Look at the breaker, because the range plugs into an ordinary outlet on a circuit of its own and nothing lights without power.
Wolf also wants two openings left free: the slot over the door where cooling air is drawn in, and the one under it where exhaust leaves. Beyond those four, the oven floor, the panels and the gas connection are left for the visit.
How the price comes together
When the igniter or the ignition board is at fault, the band in the box at the top of this page applies. Wiring and valve repairs are priced once they are found, and anything on the house side of the gas connection belongs to the gas utility or a gas fitter. The $89 diagnosis is credited if you go ahead with the repair.
Common questions
- How long should a GR304 oven take to light?
- Wolf's own limit for a GR oven burner is 40 seconds, and the igniter keeps clicking the whole time until the board registers a flame. An oven creeping toward that limit, or one that regularly needs a second attempt, is showing the early stage of an igniter or wiring fault rather than a quirk to live with.
- Does the broiler on a GR304 light the same way?
- Wolf's troubleshooting treats a bake burner and a broil burner that will not light as one problem with one list of causes. So note whether the delay comes on Bake, on Broil or on both before you call Wolf Repair Bellevue, (425) 629-0033; that detail narrows the search before the range is even opened.
- Where is the model plate on a GR304?
- Lower the oven door, then look along the bottom edge of the control panel toward the far right. Wolf fixes the rating plate there on its GR ranges, with the model and serial number printed on it. Having both to hand lets the right igniter or board be matched to your range before the visit.